Please call
for help selecting
Dixon Hose Nipples

Dixon Hose Nipples

Hose nipples, made from tubular stock, to fit straight end hose. Threaded end, in all styles, has male NPT thread - same size as hose; i.e. 2" nipple has 2" thread and fits 2" I.D. hose. Combination nipples are recommended for low pressure discharge and suction service. The working pressure of combination nipples varies with the size of the nipple, the size and construction of the hose and the type of clamping system used. A coupled length of hose, in any size, should be tested to 1 1/2 times the working pressure and held for 15 minutes without leaking or coupling movement. As a general rule, these fittings are not recommended for pressures exceeding 100 PSI on hose diameters 3" and over. Not intended for compressed air on sizes 1 1/4" and above.