SIZE RANGE: 10 through 24 inch.

MATERIAL: Chrome molybdenum steel except U-bolt which is stainless steel.

SPECIFICATIONS: Load ratings are substantiated by laboratory test.

SERVICE: Recommended for suspension of high temperature pipe requiring up to 6 inches of insulation.

MAXIMUM TEMPERATURE: 1075*F.

APPROVALS: Complies with Federal Specification WW-H-1 71 E (Type 2) and Manufacturers Standardization Society SP-69 (Type 2).

INSTALLATION: Normally used with welded eye rod fig. 278, page ph-57, or drop forge weldless eye nut fig. 290, page ph-64.

• Designed for the support of heavy loads at high temperatures.

- Clamp with filler plate will snugly hold pipe of nonstandard size.

• Alloy load distribution strap provided.

• When used on pipe with 6 inches of covering, the top bolt is outside of the insulation.