Keckley Hydraulic Pressure Regulators are priced affordably and ready for delivery at
logo.gif (4079 bytes)
America's Number #1 Choice For

Keckley Hydraulic Pressure Regulators

Gateway Supply Keckley Hydraulic Regulators specialists
329 East Poplar St,  Sidney, Ohio 45365

Please call
for help selecting

Keckley Hydraulic Pressure Regulators

About
Gateway

Browse
our lines

Search
web site

Discounted
specials

Government
buyers

Terms/Pay
methods

Email us

Monthly
drawings

Goto
Home Page

Keckley
Hydraulic Pressure Regulators

Bronze Body
Pressures to 5000 psi - Water or Oil Service
Pressures to 4000 psi - Air Service

The Type H Pressure Reducing Regulator is an internally balanced, piston actuated, spring loaded valve, constructed for high pressures and small capacities, and for dead end service.

Construction: The main valve is of the needle type and is carried in a stainless steel yoke. All internal parts are accessible and removable for servicing without disconnecting or breaking line connections.

Regulator is single seated normally open, and throttles to a closed position. Valve disc and seat are of hardened stainless steel and readily accessible and removable. Stellite facing on valve seat can be furnished when specified at additional cost.

Adjusting springs provide for minimum pressure differential between opening and closing pressures and various spring sizes are available for either wide or limited pressure ranges

An "0" ring seal has been used to reduce friction with a resulting closer regulation and improved tight sealing of fluids.

Regularly furnished in bronze body with crank adjustment. Set screw adjustment and screw cap are optional.

Applications: Primarily designed for the reduction of comparatively high initial pressures to secondary operating pressures with a wide range of adjustment. Particularly adapted for restricted flow of accumulator service.

Suitable and recommended for use hydraulic pressure service using the two pressure system where only the final and holding pressure is through the valve. Also used for the Operates of hydraulic test apparatus requiring regulated high pressure and small flow.

Ordering: Specify initial pressure, reduced pressure, service such as water, oil or kind of liquid, gas, and the volume of flow required.

Pressure ranges (pounds per square inch): No. 1 Spring 50 to 1,000 psi-, No. 2 Spring, 1,000 to 2,500 psi-, No. 3 Spring, 2,500 to 5,000 psi.

Intermediary Springs can be furnishe with a lower pressure range to meet more specific initial and final pressur operations as used on air, water or o

Please call the Gateway Keckley Hydraulic Pressure Regulators specialists

Gateway Supply also handles the following Keckley products:
Float Valves, Lever Valves, Pressure Reducing Valves, Back Pressure Relief Valves, Diaphragm Control Valves, Water Pressure Regulators, Solenoid Valves, . We also sell Keckley Pressure & Temperature Regulators, Keckley Hydraulic Pressure Regulators, .

Goto Home Page

Gateway Supply websites are managed by Online Design & Technology in accordance with Gateway-Online Design & Technology agreement #043098.