Manual Pipe Threaders

Exposed Ratchet Threaders
The die head locks into the ratchet assembly a is removed by pulling out the ratchet knob. No. 00 R: A" - 1 No. 12R: 1/8" - 2"

Enclosed Ratchet Threader
Die heads snap in from either side. Ratchet knob indicates forward or reverse. No. 11 R: 1/8" - 1 1/4"

3-Way Pipe Threaders
Each model cuts three thread sizes. Each die is set locked in place. Drop head threaders and three way units use interchangeable dies. Two sizes for 'A" through 1 " pipe and conduit.

Ratchet Bolt Threaders
Button dies easily adjust for size and can be changed or reversed to bolt shoulder with head. The die heads fit #OOR ratchet housing. Two models: Complete 1/4" - 1 with 16th sizes Complete 1/4" - 1 less 16th sizes

3-Way Bolt Threaders
Ideal for threading common sizes of bolt and rod. Tool steel dies are easily removed and are held in place by set screws which also provide adjustment for over or undersize threads.
No. 31 B: V, 3/8", 1/2" UNC or UNF
No. 33B: 3/8", '/a'' UNC or UNF
No. 35B: 1/2", A" UNC or UNF
No. 37B: W', A", 1" UNC or UNF

 Metal Carrying Case
Steel cases with rust-resistant finish keep die sets together, Suitable for die heads: OOR, OR, OORB, 111 R, 12R.

Model No. 258 Power Pipe Cutter
The RIDGID No. 258 and 258XL Power Pipe Cutters are designed to squarely cut 2 1/2" to 8" or 8"-1 2" steel pipe. The cutting action is powered by the RIDGID 700 power drive in conjunction with a large diameter cutter wheel. The cutter wheel is advanced to the pipe via a pivot arm. The pivot arm advances the cutter wheel by utilizing a 1 Boston hydraulic cylinder and foot pump. A special pipe roller is available to rotate pipe for bevel grinding.
Pipe Cutting Capacity
258 2 1/2"-8"
258XL 8"-12"

Power Threaders

Model 600 Portable Power Drive
Hand-held, powerful, portable power drive Features a reversible 11 5V or 220V universal motor
Capacity: 1/8"-1 1/4" (3mm - 32mm) pipe. Designed for RIDGID 11 R die heads
Ideal for on-site, overhead and restricted area applications

Model 700 Power Drive
Heavy-duty hand-held, power drive
Features a reversible heavy duty motor
Capacity: 1/8" - 2" (3mm - 50mm). Designed for RIDGID 12R die heads. Other RIDGID die heads (OOR, OORB, 11 R) using adapters, threads 2 1/2"" - 6" (62mm - 150mm) with 141/161 geared threaders.

Model 300 Power Drive Only
RIDGID speed chuck Reversible 1/2 HP motor
Capacity: 1/8" - 2" (3mm - 50mm) pipe. 2 1/4" -4", 4" - 6" with 141 and 161 geared threaders: 1/4" - 2" (6mm 50mm) rod
Recessed on/off reversing switch

Model 300 Power Drive Complete
Consists of:
300 power drive only with foot switch
1206 stand
311 carriage with lever
341 reamer
360 cutter
811 A universal die head
Set 1/2"-3/4" universal alloy dies
Set 1 " - 2" universal alloy dies
318 oiler

Model 300 Power Drive Accessories
Low cost accessories are available to convert your 300 power drive into a low cost threading machine (see RT-1 91 for details).

Jam Proof Threaders
The Nos. 65 R-TC and 65RC thread 1 "-2 pipe with one set of dies. Both kick out automatically to prevent damage and delay. No. 65 R-TC has true centering work holder.
No. 65RC has cam type work holder.

Geared Threader Operation
The Nos. 141 and 161 geared threaders used in conjunction with accessories allow the conversion of power drives and threading machines to thread 4"-6" pipe.

Model 1215 Threading Machine
Capacity:
Pipe: 1/4,''-1 1/2" (6mm - 36mm)
Bolt: 5/16"-1" (7.5mm - 24mm)
Features:
Lightweight, 69 7/1 highly portable
Hammer type chuck with replaceable jaws
1/2 HP universal motor (44 RPM)
Through die head oiling ensures proper lubrication of dies
Integral foot switch for safe operation

Model 535 Threading Machine
Capacity:
Pipe: 1/8" - 2" (3mm - 50mm), 2 1/2" - 4" (62mm - 100mm),   4" - 6" (100mm -150mm) with 141 and 161 geared threaders.
Bolt: 1/4" - 2" (6mm - 50mm)
Features:
Speed chuck with rocker-action jaws centers and grips work piece instantly
Can be used with geared threaders
Suited to a wide variety of quick and self-opening die heads
Through die head oiling
Length gauge for quick, accurate cut off
Integral foot switch for safe operation

Model 1822-1 Threading Machine
Capacity:
Pipe: 1/8" - 2" (3mm - 50mm), 2 1/2"-4" (62mm - 100mm)1 with 141 geared threader.
Bolt: 1/4" - 2" (6mm - 50mm).
Features:
Center Lock Chuck: Automatic chucking system allows material to be centered and gripped at the turn of a switch.
Speed: Two-speed operation. 45 RPM for pipe threading, 16 RPM for bolt and low-voltage operation.
Quiet: Induction motor (81 7/1 delivers constant 45 or 16 RPM as required.
Through-Head Oiling: Insures constant and proper lubrication of dies and work piece.