Midget Tubing Cutters Nos. 101, 103,104
Designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing.
No. 101 Capacity 1/4"-1 1/8"
No. 103 Capacity 1/8"- 5/8"
No. 104 Capacity 3/16 - 15/16"

Tubing Cutters Nos. 150, 205
No. 150 features enclosed feed screw to eliminate clogging and jamming, grooved rolls for close to flare cuts and a told-away reamer. No. 205 has all the features of the 150, plus a quick-acting mechanism.
No. 150 Capacity '1/8"- 1 1/8"
No. 250 Capacity 1/4"- 2 3/8"

Tubing Cutters No. 10, 15, 20, 30
Clean, square cuts are easily made on copper, brass, aluminum and thin wall conduit. No. 30 is rated for larger diameter steel and stainless steel tubing.
No. 10 Capacity 1/8"- 1"
No. 15 Capacity 3/16" - 1 1/8"
No. 20 Capacity 5/8"- 2 1/8"
No. 30 and No. 30P Capacity 1"-3 1/8"

Quick-Acting Tubing Cutters
Nos. 151-156 feature a quick-acting design, I-beam construction, hardened wear surfaces and thrust bearing assemblies for smooth operation. These cutters are available for either cutting plastic pipe or metallic tubing.
No. 151 Capacity 1/4"-1 5/8" OD
No. 152 Capacity 1/4- 2 5/8" OD
No. 153 Capacity 1 1/4" - 3 1/2" OD
No. 154 Capacity 1 7/8" - 4 1/2" OD
No. 156 Capacity 4" - 6" OD

No. 138 and 1493 Plastic Pipe Cutters
Designed for quick, clean cuts through plastic pipe and tube. These cutters feature a compound leverage ratchet mechanism, hardened steel blades and simple one-hand 5/8"
No. 138 Capacity 1/8"-1 1/2" OD
No. 1493 Capacity 1/8"- 2 1/8" OD

 No. 50 Muffler Cutter
5/8" and short feed screw give good leverage for quick cuts. Rugged frame withstands abuse. Specially designed wheel cuts through toughest exhaust pipe materials.
No. 50 Capacity 1/8"- 2 1/2"